Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on an Opel Mokka X 1.6 CDTi

Model: Vauxhall Mokka Mokka A - Years 2012-2019
Part: Air filter

In this video tutorial, you will learn how to remove and replace the engine air filter on an Opel Mokka X 1.6 CDTi by following these simple steps. First, open the bonnet of your car and remove the intake hose found on the left; to do this, disconnect the electrical connector of the mass airflow sensor and unscrew the clamp screw. Next, unscrew the securing screws of the air filter cover; now you can remove and replace the filter with a new one of the correct type. Finally, reassemble everything, following the video to the end!

Updated on 11 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to change the air filter on the Opel Mokka CDTI
How to change the air filter on the Opel Mokka CDTI
Vauxhall Mokka (2012-2019 / Mokka A) In this short video, see how to remove and replace the engine air filter on the Opel Mokka CDTI, as well as on the petrol version. First, open the bo…
How to replace the engine oil and oil filter of the Opel Mokka 1.6 CDTi
How to replace the engine oil and oil filter of the Opel Mokka 1.6 CDTi
Vauxhall Mokka (2012-2019 / Mokka A) Today we will see the necessary steps to carry out the ordinary maintenance check, replacing the engine oil and oil filter of the Opel Mokka 1.6 CDTi…
Replacing the Timing Belt and Water Pump on the Opel Mokka 1.7 CDTI
Replacing the Timing Belt and Water Pump on the Opel Mokka 1.7 CDTI
Vauxhall Mokka (2012-2019 / Mokka A) Today's guide will show you the main steps on how to remove and replace the timing belt on the Opel Mokka 1.7 CDTI. First, open the bonnet of your ca…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos