Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch Discs on an Opel Astra J 1.4 VVT

Model: Vauxhall Astra Astra J - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Clutch

See other generations:
Video tutorial

In this guide, you will find step-by-step instructions to remove and replace the clutch pack and its discs on an Opel Astra J 1.4 VVT. First, lift the vehicle and remove the front wheels; then proceed to extract the driveshaft by disconnecting the braking system (removing the pin from the wishbone).

At this point, disconnect the battery, removing it along with the battery tray; unbolt the engine mount located underneath, keeping it supported with a jack.

Now unscrew the bolts of the gearbox casing to remove the clutch, following the video to the end for complete disassembly!


Updated on 15 April 2026 by ScegliAuto


Related tutorials

Guide to replacing the clutch of the Opel Astra 1.9 CDTi
Guide to replacing the clutch of the Opel Astra 1.9 CDTi
Vauxhall Astra (2004-2010 / Astra H) Today we will discover the main instructions useful for disassembling and replacing the clutch kit of the Opel Astra 1.9 CDTi. First of all, lift the…
Removing Clutch from Opel Astra
Removing Clutch from Opel Astra
Vauxhall Astra (2004-2010 / Astra H) Today, you will see the main steps to remove the clutch from an Opel Astra. First, lift the vehicle and remove the front wheels by unscrewing their b…
Clutch Replacement on Opel Astra 1.7 CDTi
Clutch Replacement on Opel Astra 1.7 CDTi
Vauxhall Astra (2009-2016 / Astra J) In today's video, you will see important instructions for removing the clutch on an Opel Astra 1.7 CDTi. First, lift the vehicle and remove the oil d…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos