Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Oil and Oil Filter Change on Opel Astra H

Model: Vauxhall Astra Astra H - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Engine oil

See other generations:
Video tutorial

Lift the vehicle and remove the T45 Torx screw underneath the engine bay to free the oil drain hole, collecting the oil in a container (dispose of it properly at recycling centres). Using a socket and a 24 mm insert, unscrew the oil filter housing from above and replace the filter by pulling it out of its seat (use absorbent paper or rags during the process and remember to replace the O-ring, lubricating the new one before installation).

Refill with the same amount of oil that drained from the upper hole in the engine bay.


Updated on 17 April 2026 by ScegliAuto


Related tutorials

How to Replace the Oil Filter on the Opel Astra J
How to Replace the Oil Filter on the Opel Astra J
Vauxhall Astra (2009-2016 / Astra J) To replace the oil filter on the Opel Astra J, open the bonnet to access the components in the engine bay. The oil filter is located on the right sid…
Replacing Engine Oil and Oil Filter on an Opel Astra H
Replacing Engine Oil and Oil Filter on an Opel Astra H
Vauxhall Astra (2004-2010 / Astra H) In this short video, we will see how to perform routine maintenance by replacing the engine oil and oil filter on an Opel Astra H with a 1.7 CDTI eng…
Engine Oil and Filter Replacement for Opel Astra
Engine Oil and Filter Replacement for Opel Astra
Vauxhall Astra (2004-2010 / Astra H) In this video, you will learn how to replace the engine oil and oil filter on the Opel Astra. Open the bonnet and use a socket wrench with an extensi…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos