Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the water pump on an Opel Corsa?

Model: Vauxhall Corsa Corsa C - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Pump

See other generations:
Video tutorial

To replace the water pump on an Opel Corsa, open the bonnet to access the engine bay. Next, remove the airbox located on the left by disconnecting the connectors and hoses. This will provide access to the timing belt: after removing the side covers of the engine, proceed to remove the belt and loosen its pulleys.

This will allow access to the water pump, which can then be removed from its housing. Finally, install the new pump and reassemble all previously removed parts.


Updated on 15 May 2026 by ScegliAuto


Related tutorials

Replacing the Water Pump on an Opel Corsa C
Replacing the Water Pump on an Opel Corsa C
Vauxhall Corsa (2000-2006 / Corsa C) In this video tutorial, learn how to remove and replace the water pump on an Opel Corsa C. First, open and lift the bonnet; to remove the water pump,…
Replacing the Water Pump on Opel Corsa
Replacing the Water Pump on Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) Replace the water pump on the Opel Corsa. Remove the pump from inside the engine bay. Lift the front bonnet of the car to access the pump. Disconnect…
How to Replace the Water Pump on an Opel Corsa
How to Replace the Water Pump on an Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) In this tutorial video and the description below, learn how to replace the water pump on the vehicle yourself. First, open the bonnet, remove the air…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos