Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Engine Oil on the Opel Corsa 1.2 Petrol

Model: Vauxhall Corsa Corsa D - Years 2006-2014
Part: Engine oil

This video outlines the procedure to follow, accompanied by verbal description, for replacing the engine oil and oil filter. First, lift the car, preferably using axle stands, to facilitate the work. Position a container under the engine and unscrew the oil drain plug using a ratchet and a 45 mm socket. After draining all the used oil, proceed to remove the oil filter, again using a ratchet with an extension and a 24 mm socket, removing the filter and the seal from its seat. Now, you can install the new filter and the new seal, lubricating the latter for better adherence. Finally, after tightening the oil drain plug, pour the first three litres of new oil into the engine and start the engine for a few seconds to check the level. If it is insufficient, add an additional litre of oil and check the level again. If the oil quantity is okay, the job can be considered complete.

Updated on 30 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Vauxhall Corsa (2006-2014 / Corsa D) In today's video, you will see how to change the gear oil on an Opel Corsa D 1.2 Petrol. First, lift the vehicle, and remove the longitudinal bar fou…
Vauxhall Corsa (1993-2000 / Corsa B) Learn how to remove the fuel filter on an Opel Corsa. Lift the car on a column lift; locate the fuel filter (as shown in the video). Using a screwdri…
Vauxhall Corsa (2000-2006 / Corsa C) Here's how to remove and replace the fuel filter on an Opel Corsa: Lift the car on a column lift or jack and locate the fuel filter as shown in the v…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos