|
Do it yourself
| |||
| ||||
Replacement of Front Shock Absorber Mount
Model: Vauxhall Astra
Astra G
- Years:
1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Video tutorial
When the front shock absorber mount fails, a loud creaking is heard when steering from a standstill, which intensifies while driving on uneven surfaces; to replace this mount, first dismantle the front shock absorber and have the appropriate tool to compress the spring. Lift the vehicle on a hydraulic lift and remove the front wheel; then disconnect the drop link, pull out the grommet, and free the brake fluid pipe from its support. Unscrew the securing pins of the shock absorber to the hub and access the engine bay to complete the dismantling by unscrewing the mounting nuts of the mount to the body strut; at this point, compress the spring with the appropriate tool and unscrew the mounting nut of the mount from the shock absorber shaft to extract the old one and insert the new one: only after tightening the nut on the shaft should you release the spring; then proceed in reverse for the installation of the shock absorber with the new mount on the vehicle.
Updated on 15 February 2026 by ScegliAuto
Related tutorials
Vauxhall Astra
(2009-2016 /
Astra J)
Today we will see the instructions that will allow us to disassemble and replace the front wipers of the Opel Astra, in simple steps. First of all, l…
Vauxhall Astra
(1998-2006 /
Astra G)
Follow these main instructions to remove and replace the front bumper of the Opel Astra. First, open the bonnet of your car and start unscrewing the …
Vauxhall Astra
(2004-2010 /
Astra H)
In this tutorial, you will see the main steps on how to remove and replace the front wiper blades on the Opel Astra H, following the instructions bel…
Other guides you may be interested in
|
How to lower the rear seats in the Peugeot 206?
In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.173
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |