|
Do it yourself
| |||
| ||||
Replacing the cigarette lighter fuse on an Opel Astra and location of fuse boxes
Model: Vauxhall Astra
Astra K
- Years 2015-2022
The interior fuse box of the Opel Astra K version is located behind the Center Console cover. To remove it, we will have to pull towards us decisively (but also with a certain delicacy) in order to expose the passenger compartment box, where the fuses that protect the cigarette lighter are kept. The fuses involved are no. #4 (if your car is from 2016/2018) or the n. #29 (if later). There is another fuse which protects the socket in the load compartment. This is located in the box located in the engine compartment, which is located at the front left of the engine compartment, just in front of the driver. In this case the fuse is #35. A further fuse box is also located in the load compartment, again on the left side of the car (i.e. behind the driver) in a compartment in the upholstery above the wheel arch.
Posted on 5 February 2023 by ScegliAuto
Video tutorial
Related tutorials
Vauxhall Astra
(2015-2022 /
Astra K)
The fuse for the cigarette lighter of the Opel Astra is located in the fuse box inside the passenger compartment: this box can be found at the bottom…
Vauxhall Astra
(2004-2010 /
Astra H)
There are two fuse boxes on the Opel Astra H. The first is located in the trunk; on the right side, having the trunk open in front, just under the co…
Vauxhall Astra
(2009-2016 /
Astra J)
The Opel Astra model J has two fuse boxes inside. The first fuse box is located inside the front hood, while the second fuse box is located inside th…
Other guides you may be interested in
|
Installation of Upgraded Intercooler Radiator with Pipes
Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.121
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |