Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Pump in the Opel Vectra?

Model: Vauxhall Vectra Vectra B, MK 2 - Years 1995-2002
Part: Fuel pump

In this tutorial, see how to replace the fuel pump in the Opel Vectra, a very simple and quick operation. Before proceeding, to work safely, disconnect the negative terminal of the battery, then lift the rear seat and open the hatch where the pump is located. Once done, disconnect the large central power connector, detach both pipes by unlocking the respective clips, and unscrew the outer ring. At this point, extract the pump from the tank and fit the replacement by following the reverse procedure.

Updated on 28 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Fuel Pump on an Opel Vectra C
How to Remove the Fuel Pump on an Opel Vectra C
Vauxhall Vectra (2002-2008 / Vectra C, MK 3) This simple guide shows you how to remove the low-pressure fuel pump or the fuel sender unit on an Opel Vectra C, second series. First, open the rear…
Removing Fuel Pump from Opel Vectra 1.6 16V
Removing Fuel Pump from Opel Vectra 1.6 16V
Vauxhall Vectra (1995-2002 / Vectra B, MK 2) In this tutorial, you will learn how to remove the fuel pump from an Opel Vectra 1.6 16 valve. First, access the rear of the car and remove the carpe…
Removing the Fuel Pump on the Opel Vectra C
Removing the Fuel Pump on the Opel Vectra C
Vauxhall Vectra (2002-2008 / Vectra C, MK 3) In today's tutorial video, you will learn how to remove and replace the fuel pump or fuel sender on the Opel Vectra C, third series, by following the…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos