Do it yourself
Frequently asked questions about cars and motorcycles

How to Clean the EGR Valve of an Opel Astra

Model: Vauxhall Astra Astra J - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: EGR valve

See other generations:
Video tutorial

In this video, see how to clean an EGR valve. In this Opel, the valve is easily accessible, so removing it is straightforward.

Just disconnect the connector, unscrew the screws, and gently take it out of its housing. You will notice it is full of soot, so avoid letting any debris fall into the engine.

Remove the bulk with a screwdriver, then separate the electrical part from the mechanical part by unscrewing the four screws that connect them. To clean the mechanical part, any degreasing product will do, and you will also need a brush to reach every part of the component.

If you use anything metallic, be careful not to scratch the sliding needle. Rinse with water and degreaser, then with just water.

Reassemble the valve with its electrical part, and refit it, replacing the gaskets. The job is complete.


Updated on 29 July 2026 by ScegliAuto


Related tutorials

Vauxhall Astra (2009-2016 / Astra J) In this video tutorial, you will see how to dismantle the EGR valve of an Opel Astra J 1.7 CDTi. First, open the bonnet and locate the EGR valve by r…
Vauxhall Astra (2004-2010 / Astra H) In this guide, we will see the procedure for removing and replacing the EGR valve on the Opel Astra 1.9 CDTi, following the instructions below. First…
Vauxhall Astra (2009-2016 / Astra J) Removing the EGR valve on an Opel Astra? Let’s see how to take the valve out from the engine bay of the Astra. Lift the bonnet and secure it, then re…

Other guides you may be interested in

    Frequently Asked Questions

    • Astra 2009-2016 - What problems can the EGR valve of the Opel Astra J 1.7 CDTI cause? Read answer

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos