Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Opel Vivaro remote control.

Model: Vauxhall Vivaro MK 3, Vivaro C - Years 2019-2026
Part: Key

Through these short and simple instructions, we will see how to disassemble and replace the battery of the key remote for the Opel Vivaro. First, take the remote in hand and begin to pry on the back of the remote, removing the cover; this will give us access to the battery compartment, as shown in the video. At this point, remove and replace the battery with a new one, of the correct type (in this case, a CR 2032 3V); insert it in the correct direction and reassemble the plastic back cover, finally testing the functionality of the remote!

Posted on 20 August 2023 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the battery of the Opel Vivaro remote control?
How do you replace the battery of the Opel Vivaro remote control?
Vauxhall Vivaro (2019-2026 / MK 3, Vivaro C) In order to replace the battery of the Opel Vivaro remote control, you need to pry open the bottom part of the device, so that the cover on the back …
How do you replace the battery of the Opel Vivaro remote control?
How do you replace the battery of the Opel Vivaro remote control?
Vauxhall Vivaro (2014-2019 / MK 2) To replace the battery of the Opel Vivaro remote control, you need to lever in the bottom part of the device: by doing so, you will be able to detach…
How to replace the battery key of the Opel Vivaro
How to replace the battery key of the Opel Vivaro
Vauxhall Vivaro (2001-2014 / MK 1) The steps to replace the flat battery of the key/remote on the Opel Vivaro car are simple and quick, and can be done independently thanks to our shor…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos