Do it yourself
| ||||
|
Vauxhall Meriva - Video tutorial
Model: Vauxhall Meriva
Meriva B, MK 2
- Years 2010-2017 The common rail sensor communicates to the control unit the pressure inside the common rail, where there are very high pressures. The tube above the engine is the rail, from which the small tubes that go to the injectors come out. At the end of the tube, there is the pressure regulator, and on the other side, there is the pressure sensor. To change the sensor, the car must be cold. To proceed, we must loosen the yellow tab and pull. Then, using a 27mm wrench, we must unscrew the sensor. Remember to place a clean cloth because impurities must never enter the rail. The YouTuber sees some dirt that he manages to remove and then easily installs the new one by screwing it in by hand and then tightening it with the wrench. We reattach the yellow tab and start the engine. It takes a little while for the rail to fill up.
Posted on 22 August 2023 by ScegliAuto
How to remove the air sensor on Opel Meriva
Vauxhall Meriva (2010-2017 / Meriva B, MK 2) What to do when the air sensor gives problems? Let's disassemble the air tube to replace the sensor, let's see how to do it. We lift the front hood,
How to change the timing chain of the Opel Meriva B
Vauxhall Meriva (2010-2017 / Meriva B, MK 2) The lengthening of the timing chain with consequent noise and starting difficulty is a fairly common defect in Opel Meriva B equipped with an 81 kw 1
How to reset the tire pressure learning of the Opel Meriva
Vauxhall Meriva (2010-2017 / Meriva B, MK 2) In today's video we will see how to reset and relearn the tire pressure sensors of the Opel Meriva, following these simple steps. First, let's get ou Other guides that may interest you
|
Frequently Asked QuestionsHow do you open the fuel flap of the Volkswagen Golf 5?In order to open the fuel flap of the Volkswagen Golf 5, you need to press the appropriate button inside the passenger compartment, which is located in the rear part of the glove box on the driver's door. By pressing the button, the flap will unlock and it will then be possible to open it manually. Once the flap has been opened, the fuel tank access cap must be unscrewed. To close everything again, it will be sufficient to screw the tank cap again; subsequently, the flap must also be closed, pressing it so that it fits thanks to its locking mechanism. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.034
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |