Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Vauxhall
  4. :
  5. Corsa
  6. : How do you replace the engine oil in the Opel Corsa?

Vauxhall Corsa - Video tutorial

Model: Vauxhall Corsa Corsa E - Years 2014-2019
Part: Engine oil
Operation: How do you replace the engine oil in the Opel Corsa?

In order to replace the engine oil of the Opel Corsa, you need to open the hood so that you can have access to the components located inside the engine compartment: on the right side of the engine block, you will find the oil filter, which needs to be removed with the appropriate wrench. Then, at the bottom of the oil tank, you can locate the drain plug: this will be unscrewed in order to collect the oil inside a properly positioned container. Once all the oil has drained out, you can close the plug, insert the new filter, and top up the oil through the vent on the top of the engine block.


Posted on 20 September 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Corsa 2006-2014 - What is the correct amount of motor oil for the Opel Corsa 1.3 CDTi? Read Answer
    • Corsa 1993-2000 - How many liters of oil are needed for the gearbox on the Opel Corsa? Read Answer
    • Corsa 2014-2019 - How do I access the Opel Corsa engine oil percentage of life indicator light? Read Answer
    • Corsa 2014-2019 - How many liters of oil go into the Opel Corsa 1.2 petrol? Read Answer
    • Corsa 2006-2014 - What to do when the oil warning light appears on Opel Corsa? Read Answer
    • Corsa 2014-2019 - What does the Opel Corsa's oil change light mean? Read Answer
    • Corsa 2014-2019 - What does the lit oil pia on the Opel Corsa mean? Read Answer
    • Corsa 1993-2000 - Where is the oil cap of the Opel Corsa B located? Read Answer
    • Corsa 2006-2014 - How much does the oil and filter change cost for the Opel Corsa 1.3 multijet? Read Answer
    • Corsa 2006-2014 - How many liters of oil for the maintenance of the 2007 1.2 petrol Opel Corsa? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos