Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Water Pump from the Opel Corsa

Model: Vauxhall Corsa Corsa D - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Pump

See other generations:
Video tutorial

Remove the cover between the engine and the bodywork to access the side of the engine where the pump is located. Now you need to remove the belt; to do this, loosen the bolts on the upper pulley, which is fitted to the pump's impeller, and adjust the tensioner to relieve the tension on the belt so you can remove it. Now you can completely remove the upper pulley.

Start disconnecting all the hoses and connectors attached to the pump, keeping track of each hose's position at each inlet/outlet of the pump, and marking them if necessary. After freeing it from all connected components, begin unscrewing the 9 bolts that secure it to the engine.

Remove the old pump, ensuring to replace the gasket if the old one is questionable, and correctly position the new pump for re-bolting. Retrace the steps in reverse.


Updated on 22 February 2026 by ScegliAuto


Related tutorials

Replacing the Water Pump on an Opel Corsa C
Replacing the Water Pump on an Opel Corsa C
Vauxhall Corsa (2000-2006 / Corsa C) In this video tutorial, learn how to remove and replace the water pump on an Opel Corsa C. First, open and lift the bonnet; to remove the water pump,…
Guide to Replacing the Water Pump on the Opel Corsa 1.2
Guide to Replacing the Water Pump on the Opel Corsa 1.2
Vauxhall Corsa (2006-2014 / Corsa D) Today's guide will show you the main steps to remove and replace the water pump on the Opel Corsa 1.2. First, open the bonnet and begin by removing t…
Replacing the Water Pump on Opel Corsa
Replacing the Water Pump on Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) Replace the water pump on the Opel Corsa. Remove the pump from inside the engine bay. Lift the front bonnet of the car to access the pump. Disconnect…

Other guides you may be interested in

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos