Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Opel Meriva

Model: Vauxhall Meriva Meriva A, MK 1 - Years 2003-2010
Part: Service warning light

To reset the service of the Opel Meriva, we start by checking if all the car doors are closed correctly, press the button next to the odometer until the partial mileage appears, hold down the button next to the odometer and simultaneously turn on the instrument panel, without starting the car engine, the word "insp" flashes and then a message with flashing dashes appears, followed by the message "insp xxxxx km", this means that the service has been reset, we can release the button next to the odometer and turn off the instrument panel. Finally, we can turn on the instrument panel again to verify the correct resetting of the message.

Posted on 20 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Opel Meriva?
How to Reset the Service Light on the Opel Meriva?
Vauxhall Meriva (2010-2017 / MK 2, Meriva B) As shown in this tutorial, resetting the service light on the Opel Meriva B is a very simple and quick operation. Of course, before doing this, compl…
How to Reset the Service Light in an Opel Meriva?
How to Reset the Service Light in an Opel Meriva?
Vauxhall Meriva (2010-2017 / MK 2, Meriva B) In this tutorial, see how to reset the service light in an Opel Meriva, a very simple and quick operation to perform only after completing all requir…
How to Reset the Service Light on the Opel Meriva?
How to Reset the Service Light on the Opel Meriva?
Vauxhall Meriva (2010-2017 / MK 2, Meriva B) .. In this tutorial, you will see how to reset the service light on the Opel Meriva, a very simple and quick operation to be performed.. …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos