Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the lock cylinder of the Opel Vivaro

Model: Vauxhall Vivaro MK 2 - Years 2014-2019
Part: Door lock

In this guide we will see the instructions useful for disassembling and replacing the lock cylinder of the Opel Vivaro, but also of the Renault Trafic. First of all, we open the front door and start disassembling and removing the door panel, unscrewing all the fixing screws we find on the sides; then we unscrew the side screws of the lock; then remove the handle together with the cylinder, as shown in the video. At this point we remove and install if necessary the new lock, consequently also replacing the key for opening the doors.

Posted on 26 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to remove the handle from the rear door of a Vauxhall/Opel Vivaro C
How to remove the handle from the rear door of a Vauxhall/Opel Vivaro C
Vauxhall Vivaro (2019-2026 / MK 3, Vivaro C) How to remove the handle from the rear door of an Opel/Vauxhall Vivaro C? We see it in this short video: in the thickness of the door, at the height …
How to remove the clutch master cylinder of an Opel Vivaro
How to remove the clutch master cylinder of an Opel Vivaro
Vauxhall Vivaro (2001-2014 / MK 1) Before we can begin, we will have to get inside the cockpit of our Opel Vivaro. So let's start by removing the cover placed between the clutch pedal …
How do you reset the Service light on the Opel Vivaro?
How do you reset the Service light on the Opel Vivaro?
Vauxhall Vivaro (2014-2019 / MK 2) To completely reset the Service indicator that appears on the instrument panel of the Opel Vivaro, you need to turn on the ignition by inserting the …

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos