Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 107
    4. : Outside rearview mirror

Peugeot 107 - Outside rearview mirror

Peugeot 107 (2005-2014 / MK 1)
Remove the exterior mirror on Peugeot 107 / Citroen C1
In this video tutorial we will see how to remove the left rear-view mirror on a Peugeot 107, but also on the Citroen C1 and the Toyota Aygo. First of all we …read all…
Posted on 14 February 2024 by ScegliAuto
Peugeot 107 (2005-2014 / MK 1)
How to remove the exterior mirror of a Peugeot 107
Before we can start, we will have to open the door and sit on the front seat of our Peugeot 107. Let's start by removing the internal cover placed near the …read all…
Posted on 5 January 2024 by ScegliAuto
Peugeot 107 (2005-2014 / MK 1)
Remove the mirror of the Peugeot 107
Let's see how to disassemble the Peugeot 107 mirror with attached parts. We open the car door, remove the part of the internal mirror coating (there are …read all…
Posted on 27 December 2023 by ScegliAuto
Peugeot 107 (2005-2014 / MK 1)
How to change the exterior mirror cover of the 107
How to change the outer mirror shell on a Peugeot 107? Let's see the disassembly of the cap. We use a plastic lever to remove the exterior mirror cap. We lever …read all…
Posted on 26 December 2023 by ScegliAuto
Peugeot 107 (2005-2014 / MK 1)
Replacement exterior rearview mirror
Replacing the exterior rear-view mirror involves removing the small panel on the door. Behind the plastic guard are the three mirror retaining screws which …read all…
Posted on 6 July 2023 by ScegliAuto
Car stereo (3) Battery (4) Gearbox (1) Spark plugs (1) Bodywork (1) Key (5) Timing belt (3) V-belt (1) Checks and maintenance (11) Bearing (1) Brake discs (1) Headlight (1) Tail light (1) Air filter (4) Cabin air filter (4) Diesel filter (1) Oil filter (1) Clutch (4) Headlight bulb (9) Rear light bulb (1) License plate light (2) Starter motor (2) Engine oil (1) Door panel (3) Front bumper (1) Brake pads (1) Door (1) Fuse box (12) Outside rearview mirror (5) Windscreen wipers (6) Central tunnel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos