Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 107
    4. : Bearing

Peugeot 107 - Bearing

Bearing Peugeot 107 (2005-2014 / mk 1)

Peugeot 107 (2005-2014 / MK 1)
Replacing the Front Wheel Bearing on the Peugeot 107
This guide provides instructions on how to remove and replace the front wheel bearing on the Peugeot 107. First, lift the vehicle and begin removing the front …Read all…
Posted on 14 May 2026 by ScegliAuto
Peugeot 107 (2005-2014 / MK 1)
Replace the Wheel Bearing on a Peugeot 107
Replace the rear wheel bearing if damaged on a Peugeot 107. Replace it with a new one. Lift the car on a column lift to a preferred height to work on it. …Read all…
Posted on 10 April 2026 by ScegliAuto
Airbag (1) Car stereo (5) Battery (5) Transmission (1) Spark plugs (1) Body (2) Control unit (1) Key (10) Timing belt (3) V-belt (3) Checks and maintenance (8) Dashboard (4) Bearing (2) Brake rotors (1) Headlight (1) Tail light (4) Air filter (8) Cabin air filter (6) Diesel fuel filter (2) Oil filter (1) Parking brake (1) Clutch (12) Fuel injectors (1) Headlight bulb (14) Tail light bulb (2) License plate light (2) Handle (1) Starter motor (3) Engine oil (2) Clock (9) Door trim panel (3) Front bumper (3) Rear bumper (2) Brake pads (1) Fuel pump (1) Car door (1) Fuse box (18) Side mirror (6) Warning light – error code (1) Service warning light (2) Fuel cap (1) Windshield wipers (12) Center console tunnel (1) Blower motor (1)

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos