Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Peugeot
  4. :
  5. 107
  6. : Rear light bulb

Peugeot 107 - Rear light bulb

Peugeot 107 (2005-2014 / MK 1)
Replacement of the rear lights of the Peugeot 107.

In case we notice that a rear light bulb of the Peugeot 107 is burnt out, for our safety, it is necessary to replace it as soon as possible. We open the rear …read all…
Posted on 16 October 2023 by ScegliAuto

Car stereo (3) Battery (4) Gearbox (1) Spark plugs (1) Bodywork (1) Key (5) Timing belt (3) V-belt (1) Checks and maintenance (11) Bearing (1) Brake discs (1) Headlight (1) Tail light (1) Air filter (4) Cabin air filter (4) Diesel filter (1) Oil filter (1) Clutch (4) Headlight bulb (9) Rear light bulb (1) License plate light (2) Starter motor (2) Engine oil (1) Door panel (3) Front bumper (1) Brake pads (1) Door (1) Fuse box (12) Outside rearview mirror (5) Windscreen wipers (6) Central tunnel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos