Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Peugeot
  4. :
  5. 107
  6. : Front bumper

Peugeot 107 - Front bumper

Front Bumper Peugeot 107 (2005-2014 / mk 1)

Peugeot 107 (2005-2014 / MK 1)
How do you remove the front bumper of the Peugeot 107?

In order to remove the front bumper of the Peugeot 107, you need to open the hood so that you can access the screws that secure the bumper from the top. Once …Read all…
Posted on 3 September 2024 by ScegliAuto
Peugeot 107 (2005-2014 / MK 1)
How to replace the front bumper of the Peugeot 107

To replace the front bumper of the Peugeot 107, we start by lifting the car on the two front sides, opening the hood, going to the left front wheel arch, …Read all…
Posted on 9 June 2024 by ScegliAuto
Peugeot 107 (2005-2014 / MK 1)
How to Remove the Front Bumper of a Peugeot 107

Do you want to replace the front bumper of a Peugeot 107? Let’s see how to proceed. Lift the bonnet and secure it. Use a socket wrench to unscrew the …Read all…
Posted on 11 March 2026 by ScegliAuto

Airbag (1) Car stereo (5) Battery (5) Transmission (1) Spark plugs (1) Body (2) Control unit (1) Key (10) Timing belt (3) V-belt (3) Checks and maintenance (8) Dashboard (4) Bearing (2) Brake rotors (1) Headlight (1) Tail light (4) Air filter (8) Cabin air filter (6) Diesel fuel filter (2) Oil filter (1) Parking brake (1) Clutch (12) Fuel injectors (1) Headlight bulb (14) Tail light bulb (2) License plate light (2) Handle (1) Starter motor (3) Engine oil (2) Clock (9) Door trim panel (3) Front bumper (3) Rear bumper (2) Brake pads (1) Fuel pump (1) Car door (1) Fuse box (18) Side mirror (6) Warning light – error code (1) Service warning light (2) Fuel cap (1) Windshield wipers (12) Center console tunnel (1) Blower motor (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos