Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 107
    4. : Body

Peugeot 107 - Body

Body Peugeot 107 (2005-2014 / mk 1)

Peugeot 107 (2005-2014 / MK 1)
How to remove the plastic cover of the upper pillar on a Peugeot 107
Here’s how to remove the plastic cover of the upper pillar on a Peugeot 107; the same procedure also applies to Citroen C1 and Toyota Aygo. First, open the …Read all…
Posted on 10 July 2026 by ScegliAuto
Peugeot 107 (2005-2014 / MK 1)
How to Open the Bonnet on a Peugeot 107
In this video, we will see how to open the bonnet on a Peugeot 107. Pull the lever located at the bottom left of the dashboard, then slightly lift the bonnet …Read all…
Posted on 16 March 2026 by ScegliAuto
Airbag (1) Car stereo (5) Battery (5) Transmission (1) Spark plugs (1) Body (2) Control unit (1) Key (10) Timing belt (3) V-belt (3) Checks and maintenance (8) Dashboard (4) Bearing (2) Brake rotors (1) Headlight (1) Tail light (4) Air filter (8) Cabin air filter (6) Diesel fuel filter (2) Oil filter (1) Parking brake (1) Clutch (12) Fuel injectors (1) Headlight bulb (14) Tail light bulb (2) License plate light (2) Handle (1) Starter motor (3) Engine oil (2) Clock (9) Door trim panel (3) Front bumper (3) Rear bumper (2) Brake pads (1) Fuel pump (1) Car door (1) Fuse box (18) Side mirror (6) Warning light – error code (1) Service warning light (2) Fuel cap (1) Windshield wipers (12) Center console tunnel (1) Blower motor (1)

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos