Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 107
    4. : Engine oil

Peugeot 107 - Engine oil

Engine Oil Peugeot 107 (2005-2014 / mk 1)

Peugeot 107 (2005-2014 / MK 1)
How to Change the Engine Oil in the Peugeot 107
The following video tutorial shows how to independently change the engine oil in a Peugeot 107 produced from 2005 to 2014. To perform the change, first open …Read all…
Posted on 16 September 2026 by ScegliAuto
Peugeot 107 (2005-2014 / MK 1)
How to Change Oil on Toyota Aygo
How do you change the engine oil on a Toyota Aygo? Let's see how to replace the oil and filter on a car similar to the 107 and C1. Lift the car on a column …Read all…
Posted on 12 May 2026 by ScegliAuto
Airbag (1) Car stereo (5) Battery (5) Transmission (1) Spark plugs (1) Body (2) Control unit (1) Key (10) Timing belt (3) V-belt (3) Checks and maintenance (8) Dashboard (4) Bearing (2) Brake rotors (1) Headlight (1) Tail light (4) Air filter (8) Cabin air filter (6) Diesel fuel filter (2) Oil filter (1) Parking brake (1) Clutch (12) Fuel injectors (1) Headlight bulb (14) Tail light bulb (2) License plate light (2) Handle (1) Starter motor (3) Engine oil (2) Clock (9) Door trim panel (3) Front bumper (3) Rear bumper (2) Brake pads (1) Fuel pump (1) Car door (1) Fuse box (18) Side mirror (6) Warning light – error code (1) Service warning light (2) Fuel cap (1) Windshield wipers (12) Center console tunnel (1) Blower motor (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos