Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 107
    4. : Clutch

Peugeot 107 - Clutch

Peugeot 107 (2005-2014 / MK 1)
Adjusting the clutch cable on a Peugeot 107
Over the years and especially with the miles traveled, the clutch cable of a car can loosen, resulting in a greater pedal travel. In today's video, we are …read all…
Posted on 3 May 2024 by ScegliAuto
Peugeot 107 (2005-2014 / MK 1)
How do you replace the clutch of the Peugeot 107?
In order to replace the clutch of the Peugeot 107, it is necessary to lift the car so that the screws fixing the front left wheel of the vehicle can be …read all…
Posted on 23 April 2024 by ScegliAuto
Peugeot 107 (2005-2014 / MK 1)
How to replace the clutch of the Peugeot 107 1.0
Let's briefly look at the instructions that will allow us to disassemble and replace the clutch of the Peugeot 107. First, we lift the car and remove the front …read all…
Posted on 28 October 2023 by ScegliAuto
Peugeot 107 (2005-2014 / MK 1)
How do you adjust the clutch pedal of the Peugeot 107?
In order to adjust the clutch pedal of the Peugeot 107, you need to remove the panel located at the back of the pedal assembly. Once the panel is removed, you …read all…
Posted on 22 October 2023 by ScegliAuto
Car stereo (3) Battery (4) Gearbox (1) Spark plugs (1) Bodywork (1) Key (5) Timing belt (3) V-belt (1) Checks and maintenance (11) Bearing (1) Brake discs (1) Headlight (1) Tail light (1) Air filter (4) Cabin air filter (4) Diesel filter (1) Oil filter (1) Clutch (4) Headlight bulb (9) Rear light bulb (1) License plate light (2) Starter motor (2) Engine oil (1) Door panel (3) Front bumper (1) Brake pads (1) Door (1) Fuse box (12) Outside rearview mirror (5) Windscreen wipers (6) Central tunnel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos