Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Peugeot
  4. :
  5. 107
  6. : Timing belt

Peugeot 107 - Timing belt

Timing Belt Peugeot 107 (2005-2014 / mk 1)

Peugeot 107 (2005-2014 / MK 1)
How to Replace the Auxiliary Belt on a Peugeot 107

In this video tutorial, see how to replace the auxiliary belt on a Peugeot 107: the first step is to remove the wheel cover and loosen the wheel bolts; next, …Read all…
Posted on 27 August 2026 by ScegliAuto
Peugeot 107 (2005-2014 / MK 1)
How to Replace the Timing Belt on a Peugeot 107

How to replace the timing belt on a Peugeot 107? Lift the car on a column lift or jack (if necessary, remove the front wheel, using a screwdriver to detach the …Read all…
Posted on 28 March 2026 by ScegliAuto
Peugeot 107 (2005-2014 / MK 1)
How to Remove the Timing Belt on a Peugeot 107

In this video, we will see how to remove the timing belt on a Peugeot 107. Open the engine bonnet and lift it, securing it in place. Use a spanner to loosen …Read all…
Posted on 15 March 2026 by ScegliAuto

Airbag (1) Car stereo (5) Battery (5) Transmission (1) Spark plugs (1) Body (2) Control unit (1) Key (10) Timing belt (3) V-belt (3) Checks and maintenance (8) Dashboard (4) Bearing (2) Brake rotors (1) Headlight (1) Tail light (4) Air filter (8) Cabin air filter (6) Diesel fuel filter (2) Oil filter (1) Parking brake (1) Clutch (12) Fuel injectors (1) Headlight bulb (14) Tail light bulb (2) License plate light (2) Handle (1) Starter motor (3) Engine oil (2) Clock (9) Door trim panel (3) Front bumper (3) Rear bumper (2) Brake pads (1) Fuel pump (1) Car door (1) Fuse box (18) Side mirror (6) Warning light – error code (1) Service warning light (2) Fuel cap (1) Windshield wipers (12) Center console tunnel (1) Blower motor (1)

How to Access the Spare Wheel of the Fiat Doblo

The Fiat Doblo comes with the spare wheel located on the underside of the vehicle. This guide explains how to access the spare wheel in case you need to use it. To access the spare wheel, open the boot of the vehicle and insert the metal tube into the designated hole near the lock. Using a torque wrench, turn the tube/key until you feel the release of the wheel from the ground, disconnect the wire, and take the wheel to place it in the housing. To facilitate removal, lift the vehicle with a jack.

Watch the video!


by ScegliAuto

More videos