Do it yourself
| ||||
|
Peugeot 107 - Video tutorial
Model: Peugeot 107
MK 1
- Years 2005-2014 We see in this video the disassembly of the timing belt on a Peugeot 107. Let's open the bonnet and lift it, let's put it in safety. With a fixed wrench we go to loosen the belt tensioner roller and remove the belt from its seat. We lift the car with a jack or column bridge to work on disassembly in the best possible way. With a socket wrench we go to unscrew the tightening pin of the belt tensioner roller, remove the water pump. We assemble the new water pump, the belt tensioner and the belt itself, we tighten everything with the socket wrench. Finally we bring the car to the ground.
Posted on 15 October 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the tire pressure warning light on Dacia Sandero?Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.028
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |