Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 107
    4. : Battery

Peugeot 107 - Battery

Peugeot 107 (2005-2014 / MK 1)
How to change the battery of Peugeot 107?
Let's learn with this tutorial how to replace the battery in the Peugeot 107. By opening the front hood, after releasing it by pulling the lever inside the …read all…
Posted on 31 March 2023 by ScegliAuto
Peugeot 107 (2005-2014 / MK 1)
Battery replacement on Peugeot 107
Raise the hood and secure it, working with the engine off and the handbrake on. The battery is located on the driver's side, therefore on your right if you are …read all…
Posted on 1 March 2024 by ScegliAuto
Peugeot 107 (2005-2014 / MK 1)
Battery replacement 107
Is the battery of our Peugeot 107 damaged? Let's see the disassembly of the damaged battery located inside the engine compartment. We open the car door and …read all…
Posted on 17 February 2024 by ScegliAuto
Peugeot 107 (2005-2014 / MK 1)
How to change the battery of the Peugeot 107.
Let's start the operation of replacing the Peugeot 107 battery, placing the car on a plane or on the bridge to work on it safely. We open the front hood of the …read all…
Posted on 16 December 2023 by ScegliAuto
Car stereo (3) Battery (4) Gearbox (1) Spark plugs (1) Bodywork (1) Key (5) Timing belt (3) V-belt (1) Checks and maintenance (11) Bearing (1) Brake discs (1) Headlight (1) Tail light (1) Air filter (4) Cabin air filter (4) Diesel filter (1) Oil filter (1) Clutch (4) Headlight bulb (9) Rear light bulb (1) License plate light (2) Starter motor (2) Engine oil (1) Door panel (3) Front bumper (1) Brake pads (1) Door (1) Fuse box (12) Outside rearview mirror (5) Windscreen wipers (6) Central tunnel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos