Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 107
    4. : Car stereo

Peugeot 107 - Car stereo

Peugeot 107 (2005-2014 / MK 1)
How to remove the car radio in the Peugeot 107
In today's video we see how to remove the car radio in the Peugeot 107. This tutorial also applies to the first generation Citroen C1 and Toyota Aygo twins. …read all…
Posted on 9 December 2022 by ScegliAuto
Peugeot 107 (2005-2014 / MK 1)
How to replace the Peugeot 107 car stereo?
In order to replace the car radio of the Peugeot 107 you need to pry an object so that the buttons on the central panel are removed and the knob to adjust the …read all…
Posted on 27 September 2022 by ScegliAuto
Peugeot 107 (2005-2014 / MK 1)
Disassembly of the car radio for repair
Using a screwdriver, unscrew the sealing screw located above the air conditioner under the fan knob. Using a plastic tool not to mark the bodywork, pry into …read all…
Posted on 13 July 2023 by ScegliAuto
Car stereo (3) Battery (4) Gearbox (1) Spark plugs (1) Bodywork (1) Key (5) Timing belt (3) V-belt (1) Checks and maintenance (11) Bearing (1) Brake discs (1) Headlight (1) Tail light (1) Air filter (4) Cabin air filter (4) Diesel filter (1) Oil filter (1) Clutch (4) Headlight bulb (9) Rear light bulb (1) License plate light (2) Starter motor (2) Engine oil (1) Door panel (3) Front bumper (1) Brake pads (1) Door (1) Fuse box (12) Outside rearview mirror (5) Windscreen wipers (6) Central tunnel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos