Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 107
    4. : V-belt

Peugeot 107 - V-belt

Peugeot 107 (2005-2014 / MK 1)
How do you replace the V-belt of the Peugeot 107?
In order to replace the serpentine belt of the Peugeot 107, you need to open the hood so that you can access the components located inside the engine …read all…
Posted on 11 March 2024 by ScegliAuto
Car stereo (3) Battery (4) Gearbox (1) Spark plugs (1) Bodywork (1) Key (5) Timing belt (3) V-belt (1) Checks and maintenance (11) Bearing (1) Brake discs (1) Headlight (1) Tail light (1) Air filter (4) Cabin air filter (4) Diesel filter (1) Oil filter (1) Clutch (4) Headlight bulb (9) Rear light bulb (1) License plate light (2) Starter motor (2) Engine oil (1) Door panel (3) Front bumper (1) Brake pads (1) Door (1) Fuse box (12) Outside rearview mirror (5) Windscreen wipers (6) Central tunnel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos