Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Peugeot 107 - Key

Peugeot 107 (2005-2014 / MK 1)
How do you program the key for the Peugeot 107?
To program the key of the Peugeot 107, you need to insert the blank key into the ignition switch and turn it to position two while the driver's door is open. …read all…
Posted on 2 August 2023 by ScegliAuto
Peugeot 107 (2005-2014 / MK 1)
How to replace the battery in the Peugeot 107 key
If the smart key of your Peugeot 107 (year 2005-2014) has stopped working suddenly and without having been damaged, it is likely that the battery inside has …read all…
Posted on 16 December 2022 by ScegliAuto
Peugeot 107 (2005-2014 / MK 1)
How to program the remote control of the Peugeot 107 key
Let's see in this guide the procedure that will allow us to program the remote control of the Peugeot 107 key, but also of the Citroen C1 and Toyota Aygo. …read all…
Posted on 10 June 2022 by ScegliAuto
Peugeot 107 (2005-2014 / MK 1)
How to change the buttons of the Peugeot 107 key
It often happens that even if the locks are pressed on the opening and closing buttons of the remote control key, they do not activate and this does not …read all…
Posted on 13 October 2023 by ScegliAuto
Peugeot 107 (2005-2014 / MK 1)
Replace the key battery of a Peugeot 107
How to replace the battery in the remote control key of a Peugeot 107? Let's see how to do it in this video. We take our remote control and go with the help of …read all…
Posted on 11 October 2023 by ScegliAuto
Car stereo (3) Battery (4) Gearbox (1) Spark plugs (1) Bodywork (1) Key (5) Timing belt (3) V-belt (1) Checks and maintenance (11) Bearing (1) Brake discs (1) Headlight (1) Tail light (1) Air filter (4) Cabin air filter (4) Diesel filter (1) Oil filter (1) Clutch (4) Headlight bulb (9) Rear light bulb (1) License plate light (2) Starter motor (2) Engine oil (1) Door panel (3) Front bumper (1) Brake pads (1) Door (1) Fuse box (12) Outside rearview mirror (5) Windscreen wipers (6) Central tunnel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos