Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to replacing the head gasket of the Peugeot 206 1.4

Model: Peugeot 206 MK 1 - Years 1998-2012

Today's guide will show us the main steps useful for disassembling and replacing the cylinder head gasket of the Peugeot 206 1.4. Firstly, we open the hood of the car and start disassembling and removing the engine support; we lift the vehicle and remove the V-belt and the timing cover, as shown in the video. At this point, we remove the timing belt and the cylinder head cover, unscrewing the fixing screws to remove it; we then replace the gasket, cleaning the cylinder head base thoroughly, following the video tutorial until the end!

Posted on 9 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Head Gasket on the Peugeot 206?
How to Replace the Head Gasket on the Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) The procedure for replacing the head gasket on the Peugeot 206 involves loosening the screws that secure the coils and spark plugs at the top of the …
Guide to replacing the cabin heating radiator of the Peugeot 206
Guide to replacing the cabin heating radiator of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Today's guide will show us the information that will allow us to disassemble and replace the heater radiator of the Peugeot 206. First, we open the f…
How to Install the Cylinder Head on the Peugeot 206
How to Install the Cylinder Head on the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Below are the main instructions that will allow you to install the cylinder head on the engine block of the Peugeot 206. In this case, the installati…

Other guides you may be interested in

    Frequently Asked Questions

    • 206 1998-2012 - How many km should the Peugeot 206 be serviced? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos