Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the cabin filter of the Peugeot 208 MK2

Model: Peugeot 208 UB, UJ, UP, MK 2, UW - Years 2019-2026
Part: Checks and maintenance

In this video we can see how on the intake of the ventilation system of the Peugeot 208 there is a filter that prevents dirt and dust from entering the cabin, we must keep it efficient every fifteen thousand kilometers and therefore it must be replaced. To do this, we open the hood of the engine compartment, remove the grille at the base of the windshield, on the passenger side, we will access the filter element, composed of two sections that we will remove after releasing the latch. We insert the two new sections, starting with the smaller one and paying attention to the direction of the flow. We put back the latch and the protective grille.

Posted on 17 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the air filter and cabin filter of the Peugeot 208
How to replace the air filter and cabin filter of the Peugeot 208
Peugeot 208 (2019-2026 / UB, UJ, UP, MK 2, UW) In this video we can see how to change the air filter and the cabin filter of the Peugeot 208: let's start with the cabin filter, from the passenger …
Replacing the cabin filter on a Peugeot 208
Replacing the cabin filter on a Peugeot 208
Peugeot 208 (2019-2026 / UB, UJ, UP, MK 2, UW) The cabin air filter on a Peugeot 208 ensures a constant flow of clean air; to maintain this, it should be replaced at the intervals specified in the…
How do you replace the cabin filter of the Peugeot 208?
How do you replace the cabin filter of the Peugeot 208?
Peugeot 208 (2012-2019 / A9, MK 1) It will be possible to replace the cabin filter of the Peugeot 208 by opening the hood, so that access can be gained to the panel located at the base…

Other guides you may be interested in

    Frequently Asked Questions

    • 208 2019-2026 - The touch screen of my Peugeot 208 is not working, what can it be? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos