Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 208
    4. : How to replace the cabin filter on a Peugeot 208

Peugeot 208 - Video tutorial

Model: Peugeot 208 UJ, UB, UW, UP, MK 2 - Years 2019-2024
Part: Cabin air filter
Operation: How to replace the cabin filter on a Peugeot 208

In our new mini guide dedicated to your Peugeot 208 second series (year 2019) we are going to find out how to replace the cabin air filter. Contrary to what one might think, it is not found inside the passenger compartment itself but in the engine compartment. So first turn off the car and lift the front hood. Immediately afterwards, remove the cover in the upper left part and proceed with the extraction of the air filter present. Finally, all that remains is to insert the new, perfectly compatible filter and reassemble the protective cover.


Posted on 29 May 2023 by ScegliAuto



How do you replace the cabin filter of the Peugeot 208?
Peugeot 208 (2012-2019 / A9, MK 1) In order to replace the cabin filter of the Peugeot 208, you need to open the hood so that you can have access to the components inside the engine co
How to replace the cabin air filter of the Peugeot 208?
Peugeot 208 (2012-2019 / A9, MK 1) In this new mini guide of ours, we will discover together how to correctly replace the cabin air filter on your Peugeot 208. First of all, the car mu
How to replace the cabin filter of Peugeot 208.
Peugeot 208 (2012-2019 / A9, MK 1) Replacing the cabin air filter in your Peugeot 208 Mk1 is a very important operation, but fortunately it only takes a few seconds to complete. Below

    Frequently Asked Questions

    • 208 2012-2019 - Where is the cabin air filter located in the Peugeot 208? Read Answer
    • 208 2019-2026 - Where is the cabin air filter located in the Peugeot 208? Read Answer
    • 208 2012-2019 - Where is the cabin filter on the Peugeot 208? Read Answer

How do you reset the tire pressure warning light on Hyundai I10?

In order to reset the tire pressure warning light on the Hyundai I10 there is no procedure that can be carried out independently. First of all, the flat tires must be returned to the correct inflation pressure, indicated on the sticker stuck in the driver's door pillar. Once the tire in question has been inflated, a diagnostic tool can be connected to the vehicle's OBD port so that the error can be reset. By following the procedure indicated in the tutorial, it will be possible to reset the warning light and turn on the ignition to check that everything has been done correctly.

Watch the video!


by ScegliAuto

More videos