Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Cleaning of the MAP sensor of the Peugeot 206

Model: Peugeot 206 MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Checks and maintenance

Video tutorial

In order to clean the MAP sensor of the Peugeot 206, we open the hood of the engine compartment, disconnect the negative battery terminal. We disconnect the three connections of the vent tube and move it aside, disconnect the electrical connector of the MAP sensor, with an 8 mm socket wrench equipped with an extension, unscrew the bolt that secures the sensor to the tube, remove it and place it on a work surface, spray a specific cleaning spray on the sensor and let it dry well.

Insert the sensor into its seat, secure it with the bolt, reattach the vent tube and connect the negative terminal to the battery.


Posted on 5 March 2025 by ScegliAuto


Related tutorials

Removing the MAP Sensor on Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Is the MAP sensor on your Peugeot 206 due for replacement? Let's see how to remove the sensor from inside the engine bay. Lift the front bonnet and s…
Cleaning the MAF Sensor on a Peugeot 206
Cleaning the MAF Sensor on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) If the Peugeot 206 exhibits non-linear engine delivery and a drop in performance, the cause may be a dirty Mass Air Flow (MAF) sensor. To clean it, o…
Removing the Temperature Sensor on Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Are you having issues with the temperature sensor? Here’s how to remove the temperature sensor on a Peugeot 206. Lift the front engine bonnet. Discon…

Other guides you may be interested in

    Frequently Asked Questions

    • 206 1998-2012 - Where is the inertia switch on the Peugeot 206? Read answer
    • 206 1998-2012 - Where is the Peugeot 206 petrol pump relay located? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos