Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Cleaning the MAF sensor of the Peugeot 206.

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Checks and maintenance

If the Peugeot 206 has a non-linear engine performance and a decrease in performance, the cause may be a dirty Mass Air Flow (MAF) sensor. To clean it, open the hood of the engine compartment and secure it with its rod. Find the sensor on the intake manifold that feeds air into the injection system, located on the passenger side. Using an 8mm socket wrench with an extension, unscrew the bolt that holds it in place and remove the sensor. Place a cloth over the engine, place the sensor on it, and spray it with a specific cleaning spray. Wait for it to dry, then reinstall the sensor in its place and secure it with the screw.

Posted on 16 August 2024 by ScegliAuto

Video tutorial

Related tutorials

Cleaning of the MAP sensor of the Peugeot 206
Cleaning of the MAP sensor of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) In order to clean the MAP sensor of the Peugeot 206, we open the hood of the engine compartment, disconnect the negative battery terminal. We disconn…
Removing the MAP Sensor on Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Is the MAP sensor on your Peugeot 206 due for replacement? Let's see how to remove the sensor from inside the engine bay. Lift the front bonnet and s…
Replacing the External Temperature Sensor on a Peugeot 206
Replacing the External Temperature Sensor on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) How to remove the temperature sensor from a Peugeot 206? Let’s look at removing the sensor from inside the engine bay. Lift the front bonnet of the c…

Other guides you may be interested in

    Frequently Asked Questions

    • 206 1998-2012 - Where is the outside temperature sensor of the Peugeot 206 located? Read answer
    • 206 1998-2012 - How to intervene when problems arise with the indicators of the Peugeot 206? Read answer
    • 206 1998-2012 - Where is the inertia switch on the Peugeot 206? Read answer
    • 206 1998-2012 - Where is the Peugeot 206 petrol pump relay located? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos