Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the instrument panel of the Peugeot Boxer

Model: Peugeot Boxer MK 1 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Instrument cluster

See other generations:
Video tutorial

In this new guide dedicated to all of you who own a first-generation Peugeot Boxer, we will discover the various steps you need to take if you want to disassemble the entire instrument panel by yourself. First of all, disconnect the vehicle's battery for safety reasons, then go inside the cabin and reach the driver's seat.

At this point, unscrew the two screws on the sides of the panel to remove the upper plastic. Once you have done this, also unscrew the other screws holding the panel in place and lift it. Finally, disconnect the electrical cable and you are done.


Posted on 22 March 2025 by ScegliAuto


Related tutorials

How to reset the oil light on the Peugeot Boxer
How to reset the oil light on the Peugeot Boxer
Peugeot Boxer (1993-2006 / MK 1) If you own a first-generation Peugeot Boxer and the oil warning light on the instrument panel continues to stay on even after replacing the oil, do n…
How to Reset the Service Light on a Peugeot Boxer?
How to Reset the Service Light on a Peugeot Boxer?
Peugeot Boxer (2006-2024 / MK 2) To reset the Service light on a Peugeot Boxer, turn on the ignition by rotating the key: once the dashboard is lit, press and hold the accelerator an…
How to Reset the Oil Change Light on a Peugeot Boxer?
How to Reset the Oil Change Light on a Peugeot Boxer?
Peugeot Boxer (2006-2024 / MK 2) To reset the Oil Change light on a Peugeot Boxer, turn the ignition key to the 'on' position and check that the light appears on the dashboard. Then,…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos