Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to deactivate the fuel cut-off valve on Peugeot Boxer

Model: Peugeot Boxer MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Checks and maintenance

See other generations:
This video is currently unavailable

If our petrol Peugeot Boxer has been hit, then it is essential to reactivate the inertia switch, which is located, in most cases - as we also see in the video - under the dashboard on the passenger side, near the wheel arch, where it is necessary to remove a plastic panel.

To reactivate this switch, simply press the button located above it; in some versions, it may be necessary to manually reposition the switch.

If manual procedures do not work, it may be necessary to perform a reset from the ECU, using a diagnostic tool.


Posted on 22 May 2025 by ScegliAuto


Related tutorials

How do you deactivate the alarm of the Peugeot Boxer?
How do you deactivate the alarm of the Peugeot Boxer?
Peugeot Boxer (2006-2024 / MK 2) To deactivate the alarm of the Peugeot Boxer, you need to connect a diagnostic tool to the OBD port of the vehicle: this can be found on the dashboar…
Peugeot Boxer: How to Reset the Fuel Pump Safety Switch
Peugeot Boxer: How to Reset the Fuel Pump Safety Switch
Peugeot Boxer (2006-2024 / MK 2) When the Peugeot Boxer experiences a strong impact or vibration, it may trigger the fuel supply safety cut-off, preventing the engine from starting. …
How do you replace the EGR valve of the Peugeot Boxer?
How do you replace the EGR valve of the Peugeot Boxer?
Peugeot Boxer (2006-2024 / MK 2) In order to replace the EGR valve of the Peugeot Boxer, you will need to open the hood to access the components located inside the engine compartment…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos