Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 207
    4. : How to remove the temperature sensor on Peugeot 207

Peugeot 207 - Video tutorial

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Coolant temperature sensor
Operation: How to remove the temperature sensor on Peugeot 207

Let's see how to best disassemble and replace the air temperature sensor on a Peugeot 207: we open the engine hood, lift and secure it with the rod. We detach the sensor power supply clamp (if necessary we disassemble the filter ventilation kit) with our hands we grab and remove the valve from its seat. After comparing the damaged valve with the new one, mount it on the ventilation pipe sleeve located in the engine compartment. We test the correct functioning of the car after installing the temperature sensor and all related parts.


Posted on 27 October 2023 by ScegliAuto

    Frequently Asked Questions

    • 207 2006-2015 - Where is the temperature bulb of the Peugeot 207 1600 petrol? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos