Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the air filter of the Peugeot Partner

Model: Peugeot Partner Tepee B9 - Years 2008-2018
Part: Air filter

Today we will explain how to replace the air filter of the Peugeot Partner mk2 petrol model. Lift the front hood opening lever to access the filter box. Using a socket wrench and a 10mm socket, unlock the central screw of the flange. Using a socket screwdriver with a 20mm Torx socket, unscrew the other 7 screws of the flange. To remove the flange, tilt it upwards and then pull it outwards. Remove the air filter and clean the compartment from any remaining impurities. Insert the new filter into the flange and mount the cover. Screw in the 7 screws and then the central screw. Close the front hood to complete the replacement.

Posted on 8 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the diesel filter of the Peugeot Partner Tepee 1.6 BlueHDI
How to replace the diesel filter of the Peugeot Partner Tepee 1.6 BlueHDI
Peugeot Partner Tepee (2008-2018 / B9) In this guide we will see the instructions that will allow us to disassemble and replace the diesel filter cartridge of the Peugeot Partner Tepee 1.6…
Removing the Peugeot Partner cabin air filter
Removing the Peugeot Partner cabin air filter
Peugeot Partner Tepee (2008-2018 / B9) Do we want to replace the pollen filter of a Peugeot Partner? We open the door and remove the plastic covers to change the filter. Remove the protect…
Where is the cabin filter located and how can it be reached in a Peugeot Partner Tepee?
Where is the cabin filter located and how can it be reached in a Peugeot Partner Tepee?
Peugeot Partner Tepee (2008-2018 / B9) The cabin filter of our Peugeot Partner Tepee is located behind the glove compartment on the passenger side. To reach it, you will need to bend down …

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos