Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble and replace the front suspensions of the Peugeot 207

Model: Peugeot 207 MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Suspension system

Video tutorial

Below we will discover the main steps on how to disassemble and replace the front suspensions of the Peugeot 207. First, we lift the car and remove the front wheel, also removing the wheel arch; then we disconnect the ABS connector, then remove the control arm and disconnect the front half-shaft from the braking system, as shown in the video.

At this point, we unscrew the upper screw of the suspension, in the engine compartment; we remove the shock absorber from below and replace it with the new one, performing the same procedure for the replacement of the other front suspension.


Posted on 22 October 2025 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb on the Peugeot 207
How to Replace the Front Headlamp Bulb on the Peugeot 207
Peugeot 207 (2006-2015 / MK 1) To complete the replacement of the front headlamp bulb on your Peugeot 207, follow these simple steps. First, park your Peugeot 207 on a flat surface…
How to Remove and Replace the Front Headlight of the Peugeot 207
How to Remove and Replace the Front Headlight of the Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Following these brief and simple instructions, you will learn how to remove and replace the front headlight of the Peugeot 207. To remove the headlig…
How to Remove the Rear Light Unit from a Peugeot 207
How to Remove the Rear Light Unit from a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) In this mini guide, you will learn how to remove the entire rear light unit from your Peugeot 207. Before starting the procedure, ensure the vehicle …

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos