Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the fuel filter of the Peugeot Traveller 2.0 BlueHDi

Model: Peugeot Traveller MK 1 - Years 2016-2024
Part: Diesel fuel filter

Below we will discover the instructions that will allow us to disassemble and replace the diesel filter of the Peugeot Traveller 2.0 BlueHDi. First, we open the vehicle's engine hood and start unscrewing the screws of the plastic cover of the diesel filter; then we disconnect the input and output fuel lines, disconnecting laterally the electrical connector, as shown in the video. At this point, we unscrew the filter with a socket wrench, removing and replacing the cartridge with the new original one; we reassemble and connect the diesel filter!

Posted on 2 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Remote Battery for Peugeot Traveller
How to Replace the Remote Battery for Peugeot Traveller
Peugeot Traveller (2016-2024 / MK 1) Replacing the battery inside the remote of your Peugeot Traveller is really simple, and with the steps described in the following guide, you will be …
Where are the fuses located in the Peugeot Traveller?
Where are the fuses located in the Peugeot Traveller?
Peugeot Traveller (2016-2024 / MK 1) All the fuses of the Peugeot Traveller are divided inside one of the appropriate fuse boxes that are installed on the vehicle: in this type of vehicl…
Where is the cabin air filter located in the 2019 Peugeot Traveller?
Where is the cabin air filter located in the 2019 Peugeot Traveller?
Peugeot Traveller (2016-2024 / MK 1) To independently locate the cabin air filter of your Peugeot Traveller (2019), it only takes a few minutes. First, reach the front passenger seat, th…

Other guides you may be interested in

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos