Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the cabin air filter located in the 2019 Peugeot Traveller?

Model: Peugeot Traveller MK 1 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Cabin air filter

Video tutorial

To independently locate the cabin air filter of your Peugeot Traveller (2019), it only takes a few minutes. First, reach the front passenger seat, then open the glove compartment and proceed to remove it. To do this, simply unscrew all the various screws present and then disconnect the electrical cable connected to the compartment itself.

Once this is done, locate the air filter box and remove the protective cover to gain access to the air filter you were looking for, thus completing the procedure.


Posted on 4 December 2025 by ScegliAuto


Related tutorials

How to Replace the Air Filter on the Peugeot Traveller
How to Replace the Air Filter on the Peugeot Traveller
Peugeot Traveller (2016-2024 / MK 1) To replace the engine air filter in your Peugeot Traveller (2016-2023), it only takes a few minutes. In fact, by following the steps outlined in this…
Location of the Cabin Filter on Peugeot Traveller
Location of the Cabin Filter on Peugeot Traveller
Peugeot Traveller (2016-2024 / MK 1) In this video, find out where the cabin air filter (pollen filter) is located on the Peugeot Traveller: it is on the passenger side, where you will n…
How to replace the fuel filter of the Peugeot Traveller 2.0 BlueHDi
How to replace the fuel filter of the Peugeot Traveller 2.0 BlueHDi
Peugeot Traveller (2016-2024 / MK 1) Below we will discover the instructions that will allow us to disassemble and replace the diesel filter of the Peugeot Traveller 2.0 BlueHDi. First, …

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos