Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Location of the Cabin Filter on Peugeot Traveller

Model: Peugeot Traveller MK 1 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Cabin air filter

Video tutorial

In this video, find out where the cabin air filter (pollen filter) is located on the Peugeot Traveller: it is on the passenger side, where you will need to remove the glove compartment, or at least take it out of its housing to flip it over and access the area behind it, where you will find - on the left side, corresponding to the central console - a vertical plastic cover.

Remove it and gently pull out the paper filter inside.

Clean the area with a blast of compressed air and a cloth to remove all dust and any debris before placing the new filter in position (be careful of the fitting direction). Close the cover, replace the glove compartment, and the job is done.


Updated on 12 August 2026 by ScegliAuto


Related tutorials

How to replace the fuel filter of the Peugeot Traveller 2.0 BlueHDi
How to replace the fuel filter of the Peugeot Traveller 2.0 BlueHDi
Peugeot Traveller (2016-2024 / MK 1) Below we will discover the instructions that will allow us to disassemble and replace the diesel filter of the Peugeot Traveller 2.0 BlueHDi. First, …
How to Replace the Air Filter on the Peugeot Traveller
How to Replace the Air Filter on the Peugeot Traveller
Peugeot Traveller (2016-2024 / MK 1) To replace the engine air filter in your Peugeot Traveller (2016-2023), it only takes a few minutes. In fact, by following the steps outlined in this…
Where is the cabin air filter located in the 2019 Peugeot Traveller?
Where is the cabin air filter located in the 2019 Peugeot Traveller?
Peugeot Traveller (2016-2024 / MK 1) To independently locate the cabin air filter of your Peugeot Traveller (2019), it only takes a few minutes. First, reach the front passenger seat, th…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos