Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin filter in the Peugeot Boxer van?

Model: Peugeot Boxer MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Cabin air filter

See other generations:
Video tutorial

In this tutorial we can see how to replace the cabin filter in the Peugeot Boxer van, an extremely simple and fast operation. First of all, go to the passenger side, then open the glove compartment, empty it and unscrew all the internal screws with a Torx T20 key. Then release the drawer, unscrew the additional screws indicated and separate the entire compartment from the dashboard.

At this point, all that remains is to open the long rectangular door by unscrewing the bolts with a 5.5mm key, remove the old filter, insert the replacement and reassemble everything following the reverse procedure.


Posted on 19 November 2025 by ScegliAuto


Related tutorials

How to replace the AdBlue tank on the Peugeot Boxer 2.0
How to replace the AdBlue tank on the Peugeot Boxer 2.0
Peugeot Boxer (2006-2024 / MK 2) Today's main steps will show you how to remove and replace the AdBlue tank on the Peugeot Boxer 2.0. First, you need to raise the vehicle and locate …
How to Replace the Wiper Blades on a Peugeot Boxer
How to Replace the Wiper Blades on a Peugeot Boxer
Peugeot Boxer (1993-2006 / MK 1) Wiper blade replacement on a vehicle should be done at least once a year. The steps to replace the wiper blades on a Peugeot Boxer are straightforwar…
Removing the Cabin Filter on a 2022 Peugeot Boxer
Removing the Cabin Filter on a 2022 Peugeot Boxer
Peugeot Boxer (2006-2024 / MK 2) In this video, we will see how to remove the cabin filter from a 2022 Peugeot Boxer: at the bottom of the dashboard, just below the control panel whe…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos