Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to charge the battery of the Peugeot 308 with jumper cables.

Model: Peugeot 308 T9, MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Battery

See other generations:
Video tutorial

If the battery is dead, the car is unable to start. This situation panics many drivers, but actually getting back on the road is simpler than we think; we just need to check that we have jumper cables in the trunk.

The following video shows us how to connect the jumper cables to an external battery or to an external vehicle that will allow our car to start. Charging the battery for a few minutes will enable us to get back on the road.

To perform this operation on the Peugeot 308 model two, we need to open the front hood and connect the red cable to the positive terminal and the black cable to the negative terminal. The jumper cables must also be connected to the other vehicle, so we connect the end of the red pole to the positive terminal of the external battery and the black cable to a metal part of the vehicle.


Posted on 10 January 2026 by ScegliAuto


Related tutorials

How to Replace the Battery in a Peugeot 308?
How to Replace the Battery in a Peugeot 308?
Peugeot 308 (2013-2021 / T9, MK 2) You can replace the battery in a Peugeot 308 by opening the bonnet to access the components inside the engine bay. Here, you will find the battery on…
Changing the Battery on a Peugeot 308
Changing the Battery on a Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) Need to change the battery on a Peugeot 308? Remove the battery if it is damaged. Open the car door and pull up the lever to open the engine compartm…
How to Replace the Battery of a Peugeot 308 1.2
How to Replace the Battery of a Peugeot 308 1.2
Peugeot 308 (2013-2021 / T9, MK 2) Before you start, open the bonnet of your Peugeot 308 1.2. Begin by removing the upper battery bracket, then move the cover of the positive terminal …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos