Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil in the First Model of Peugeot Expert?

Model: Peugeot Expert Mark1, MK 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Engine oil

See other generations:
Video tutorial

The first model of the Peugeot Expert was launched in 1995 and was produced until 2007, when it was replaced by the next model. Changing the engine oil in this vehicle is not difficult and follows the same procedure as in other vehicles of the same type.

The only thing to keep in mind is that the oil filter is located in the engine compartment and not underneath the vehicle. Therefore, proceed to drain the oil sump after removing the appropriate bolt, which you will close once all the used oil has drained.

Then move to the engine compartment and replace the oil filter cartridge and O-ring with new ones. Add the new engine oil and you have finally finished.


Posted on 2 May 2026 by ScegliAuto


Related tutorials

How to Reset the Engine Oil Warning Light on the Peugeot Expert
How to Reset the Engine Oil Warning Light on the Peugeot Expert
Peugeot Expert (2008-2016 / Mark2, MK 2) Today, we will discover the necessary procedure to reset the service warning light for the oil change on the Peugeot Expert. First, get in the vehicl…
How to Change the Key Battery of the Peugeot Expert
How to Change the Key Battery of the Peugeot Expert
Peugeot Expert (2016-2025 / Mark3, MK 3) If you want to complete the replacement of the small battery in your latest generation Peugeot Expert, simply follow the procedure described in this …
Where Are the Fuses Located in the Peugeot Expert?
Where Are the Fuses Located in the Peugeot Expert?
Peugeot Expert (2016-2025 / Mark3, MK 3) The fuses in the Peugeot Expert are divided between two fuse boxes located within the vehicle. This model has two: one inside the cabin and one in th…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos