Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Turn Off the Service Light on the 2019 Peugeot Partner

Model: Peugeot Partner Tepee MK 3 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Service warning light

See other generations:
Video tutorial

After covering the specified number of miles set by the manufacturer, any vehicle requires a service and thus an oil change and filter replacement. This is not a complicated job; in fact, it is often done DIY with relatively short times, concluding with the cancellation of the service light.

If you are unsure how to do this on your 2019 Peugeot Partner, follow the procedure below: press and hold the button depicting a spanner on the dashboard, turn on the ignition, wait a few seconds, and you will notice the light turning off.


Posted on 2 May 2026 by ScegliAuto


Related tutorials

How to Reset the "Service" Light on a Peugeot Partner?
How to Reset the "Service" Light on a Peugeot Partner?
Peugeot Partner Tepee (2008-2018 / B9) To reset the "Service" light on a Peugeot Partner, start with the ignition off. Press and hold the button located under the instrument cluster, near …
How to reset the "Service" light on a Peugeot Partner?
How to reset the "Service" light on a Peugeot Partner?
Peugeot Partner Tepee (2018-2026 / MK 3) To reset the "Service" light on a Peugeot Partner, turn on the instrument panel without starting the engine by turning the key in the ignition to the…
How to Reset the Service Light on a Peugeot Partner?
How to Reset the Service Light on a Peugeot Partner?
Peugeot Partner Tepee (2018-2026 / MK 3) To correctly reset the Service light displayed on the instrument panel of the Peugeot Partner, press and hold the button located at the bottom left o…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos