Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the "Service" Light on a Peugeot Partner?

Model: Peugeot Partner Tepee B9 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Service warning light

See other generations:
Video tutorial

To reset the "Service" light on a Peugeot Partner, start with the ignition off. Press and hold the button located under the instrument cluster, near the odometer display. While holding this button, turn on the instrument cluster without starting the engine.

A countdown will begin on the display, usually from ten, indicating the start of the reset procedure. Continue to hold the button until the countdown finishes and the "Service" light turns off. Then release the button and turn off the ignition.

When you turn the vehicle back on, the light should remain off, indicating that the reset has been successfully completed.


Updated on 3 November 2026 by ScegliAuto


Related tutorials

How to reset the "Service" light on a Peugeot Partner?
How to reset the "Service" light on a Peugeot Partner?
Peugeot Partner Tepee (2018-2026 / MK 3) To reset the "Service" light on a Peugeot Partner, turn on the instrument panel without starting the engine by turning the key in the ignition to the…
How to Reset the Service Light in a Peugeot Partner 3
How to Reset the Service Light in a Peugeot Partner 3
Peugeot Partner Tepee (2018-2026 / MK 3) Here’s how to reset the service light in a Peugeot Partner 3 after performing the scheduled maintenance. Start with the vehicle completely off. Locat…
How to Reset the Service Light on a Peugeot Partner Tepee
How to Reset the Service Light on a Peugeot Partner Tepee
Peugeot Partner Tepee (1996-2013 / MK 1) To reset the service light on a Peugeot Partner Tepee, turn off the dashboard and remove the key. At this point, press and hold the button used to re…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos