Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Peugeot Partner Tepee

Model: Peugeot Partner Tepee MK 1 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Service warning light

See other generations:
Video tutorial

To reset the service light on a Peugeot Partner Tepee, turn off the dashboard and remove the key. At this point, press and hold the button used to reset the trip odometer, usually located on the dashboard. While holding the button, insert the key and turn on the dashboard without starting the engine.

A countdown will appear on the display for a few seconds: continue to hold until the procedure is complete. When the display shows the confirmation message or the new maintenance interval, release the button and turn off the dashboard.

Then restart the vehicle to check that the service light has been cleared correctly.


Posted on 22 May 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Peugeot Partner Tepee
How to Reset the Service Light on the Peugeot Partner Tepee
Peugeot Partner Tepee (1996-2013 / MK 1) Today, discover the instructions that will allow you to reset the service light for the routine maintenance oil change on the Peugeot Partner Tepee. …
How to Reset the Service Light on a Peugeot Partner Tepee?
How to Reset the Service Light on a Peugeot Partner Tepee?
Peugeot Partner Tepee (1996-2013 / MK 1) The purpose of the service light, in any vehicle, including the Peugeot Partner Tepee, is to remind the driver that a service is due soon, thus a new…
How to Reset the Service Light on a 2019 Peugeot Partner Tepee
How to Reset the Service Light on a 2019 Peugeot Partner Tepee
Peugeot Partner Tepee (2018-2026 / MK 3) Today, we will perform the reset of the service light related to the car service on a 2019 Peugeot Partner Tepee. Insert the key into the ignition an…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos