Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Program the Key in the Peugeot 308 4

Model: Peugeot 308 P5, MK 3 - Years 2021-2026
Part: Key

Programming or reprogramming a key/remote for a car, in this case for the Peugeot 308, is done as follows: access the vehicle's interior, close all doors, insert the key to be programmed into the ignition and turn it on, but do not start the engine. Press the door lock button for ten seconds, release it, and remove the key. At this point, the mentioned key should be coded and ready to be used for its functions.

Posted on 24 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you program the key for the Peugeot 308?
How do you program the key for the Peugeot 308?
Peugeot 308 (2007-2014 / T7, MK 1) In this video guide, we will see how to program a coded key, or a brand new one, for a Peugeot 308, bearing in mind that the vehicle used in this dem…
How do you program the key of the Peugeot 308?
How do you program the key of the Peugeot 308?
Peugeot 308 (2013-2021 / T9, MK 2) To program the key of the Peugeot 308, you need to insert the blank key into the corresponding slot: by doing so, it will be possible to proceed by c…
How do you program the key of the Peugeot 308?
How do you program the key of the Peugeot 308?
Peugeot 308 (2013-2021 / T9, MK 2) In order to program the key of the Peugeot 308, you need to insert it into the ignition switch, and then connect a diagnostic tool to the OBD port of…

Other guides you may be interested in

    Frequently Asked Questions

    • 308 2013-2021 - What to do if the key is not detected in the Peugeot 308? Read answer
    • 308 2013-2021 - How to replace the key battery in the Peugeot 308? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos