Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Peugeot 508, Fuse Diagram: Where to Find Them and How to Read the Map

Model: Peugeot 508 MK 1 - Years 2010-2018
Part: Fuse box

On the Peugeot 508, the fuse map is displayed directly on the covers of the fuse boxes in the cabin and engine compartment. With the ignition off, open the compartment indicated in the video and remove the cover to view the diagram. Identify the circuit of interest by following the legend visible in the images, then extract the fuse using the appropriate extractor and check the internal link. If replacement is necessary, install a fuse with the same rating indicated on the body or the diagram, then securely close the cover. After the intervention, check the operation of the affected circuit.

Posted on 15 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuse boxes of the Peugeot 508 located?
Where are the fuse boxes of the Peugeot 508 located?
Peugeot 508 (2010-2018 / MK 1) The fuses are all installed inside the fuse boxes, so that's where we will need to carry out any checks to identify a fault. Where can they be found?…
Fuse Box Diagram for the Peugeot 508 Estate
Fuse Box Diagram for the Peugeot 508 Estate
Peugeot 508 (2010-2018 / MK 1) This video shows the location of the fuse box for the Peugeot 508 and the corresponding fuse assignments. This video is suitable for both the 508 sal…
Fuse Diagram and Location for the Peugeot 508
Fuse Diagram and Location for the Peugeot 508
Peugeot 508 (2010-2018 / MK 1) In today's video, we will show where to find the fuse boxes and how to locate their diagram for the Peugeot 508, following the instructions below. Fi…

Other guides you may be interested in

    Frequently Asked Questions

    • 508 2018-2026 - Where is the Peugeot 508 air conditioning fuse located? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos