Do it yourself
| ||||
|
Peugeot 207 - Video tutorial
Model: Peugeot 207
MK 1
- Years 2006-2015 In this video tutorial we will show you how to remove the front bumper of the Peugeot 207. Open the bonnet first and remove the torx screws located on the plastic flange to which the bumper is attached. Then we will go to unscrew the torx screws of both wheel covers and remove the plastic clips. With a 10 mm wrench we unscrew the fixing screw of the bumper. At this point with very delicate movements we will go slowly to extract our bumper going to leverage in several points so that we can release it evenly. Make sure you have unhooked everything before pulling!
Posted on 9 December 2023 by ScegliAuto
Other guides that may interest you |
How to reset the service in the Opel Antara?As we can see in this tutorial, resetting the service in the Opel Antara is an extremely simple and fast operation. Before proceeding, of course, we must have completed all the planned maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel, not the engine. At this point, we release the accelerator and press it 3 consecutive times, always all the way. We then restart the panel to verify that the procedure has been carried out correctly. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.021
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |